I am in the middle of putting the v tech turbocharger on my 2018 Trixx. After swapping in the upgraded injectors I have found that the original metal clips that hold the injectors to the fuel rail are the wrong size for the upgraded injectors. I also didn’t see any metal clips that came w/ the new injectors. Wondering if somebody could point me in the right direction. Thanks.
I realized the injectors are not supposed to be pushed all the way in, and after pulling them out a little there was a groove where the Origins clips slid around.
Glad you’re sorted out. Keep us up to date with your progress…those turbos are really fun builds!
Hey Joe, another question for you to make sure I’m on the right track, I am running the lines and following the manual, It says to Connect four lines via two different T-crosses, specifically hoses 10, 2, 14, and 6. I T-crossed hose #’s 2 and 6 as you can see in the picture, so would all I need to do is T-cross the other two and connect it to that?